New Swing Arm Clicker Machines (APM-SA22)


Regularly Kept In Stock – The Swing Arm Clicker Press features 22 tons of tonnage available, a 18″ x 36″ cutting table, and a 13″ beam width.  (New Machine).

Print Friendly, PDF & Email




The swing arm clicker is the workhorse for many die cutting applications and also a very capable entry-level machine. We are proud to offer the Associated Pacific Machine APM-SA series of Swing-Arm Clicking Machines. Whether you are looking for an additional cutting machine, a replacement for an old machine, or you are looking to get started in the die cutting industry, the APM-SA22 is the perfect machine for your needs.

  • Automatic stroke-end setting-up to use cutting knives of different heights without any adjustment
  • Control push buttons with built-in device for 3/10 of a second maximum delay operation to ensure positive safety.
  • Seven different models all have main control organs covered by international patents.
  • All models can be suppplied in the CE version, that is equipped with the safety devices requested by the EC-rules 89/336/CEE and 89/392/CEE.
  • Higher speed of operation and greater productivity which can increase material yield.
  • Reduced wearing of cutting dies and a dramatic increase in savings on cutting pad costs.
Range of Applications
  • Manual die cutting of materials such as foam, textiles, plastic, rubber, packaging, vinyl, leather, composites, fiberglass, cork, wood, gasket materials (non-asbestos, teflon, etc.) and more.


Machine Options
  • Machine Crating Charge – When machine is shipped via a common carrier.
  • Extra White Cutting pad – 18” x 36” x 1” thick
  • Convert Machine to Accept Single Phase Power
  • Rotary Phase Converter
  • 20″ wide Aluminum Striking Plate (19 5/8” x 20” x ¾”)
  • 2mm Steel Wear Plate on the Bed and 10mm Cutting Pad Mounted on the Head
  • CSA approved components installed – APMC will replace non-CSA approved components with CSA approved components (motor, wire, electrical components, etc.)


Beam Width: 14.6" (370 mm)
Cutting Force: 24 Tons (22 Metric Tons)
Cutting Stroke: 3.54" (90 mm)
Maximum Daylight: 4.7” (120mm)
Machine Bed: 18" x 36" (430 x 900 mm)
Main Motor: 1.5 HP
Gross Weight: 1578 Lbs (717 Kgs) Approx.
Series: APM-SA22