Receding Head Die Cutting Press 40 Ton Demo (AP-10470)


Model:  RH3563-40U;
Ton:  40;
Quantity:  1;

Print Friendly, PDF & Email


  • Automatic Die Height Setting Device – The automatic die height setting device simplifies machine setup. When changing between dies of different height, the operator only needs to place the new die into the cutting area and start the die height setting program.  The machine will automatically set itself to the new die without any additional operator interaction.

  • Touch Screen Operator Interface with Program Storage – The user friendly touch screen makes machine operation easy for any operator.  The touch screen allows the operator to perform a die setting, adjust cutting height, control receding distance and control lift height.

  • Front Photocell Safety Protection System and Rear Safety Guards

  • Polypropylene Cutting Pad and Oscillating Pad Shifter on the Head – The oscillating pad shifter greatly improves the cutting pad life by moving the cutting pad after each cut.


Machine Bed: 35.4" D x 63" W (900 x 1600 mm)
Cutting Stroke: 5.9” (150 mm)
Maximum Daylight: 7.9" (200 mm)
Receding Distance: 35.4" (900 mm)


A four-post hydraulic press producing 40 metric (44 U.S.) tons of cutting force, with two cylinders mounted over cross members linked end to end with torsion bars.  This mechanical balancing system ensures that the maximum cutting force of the press can be delivered across the entire cutting area of the machine, and keeps the bed and bridge parallel even under asymmetrical (unbalanced) loads, which, in turn, reduces mis-cuts and damaged parts and provides for longer tool and pad life.  This hydraulic press can deliver its total force during the entire down stroke.